API 650 floating-roof tanks bottoms

Welding certification is regulated by Section 10 of the American Society of Mechanical Engineers (ASME). For both API 650 floating-roof tanks storage tank API 650, non-destructive inspection is required, but third-party inspection is not required.

The tank 20-in. inside-diameter nozzle shown in Figure F-6 is located in solid plate in the sidewall of a cylindrical storage tank 148 ft in diameter in an area where the thickness of the wall plate, tw, is 11/2 in. A corrosion allowance of 0.10 in. is required on all surfaces of the tank exposed to the stored liquid. The total internal pressure, Pl + Pg, at the center of the opening is 24.9 lbf/in.2 gauge. The thickness of the API 650 floating-roof tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 1.44 in.

API 650 floating-roof tanks Breathing valve: The function of the oil tank breathing valve is to adjust the oil and gas pressure in the tank. When the pressure in the tank is too high, part of the excess oil and gas will be discharged through the breathing valve to reduce the pressure in the tank; when the pressure in the tank is too low, through breathing The valve sucks in air from the outside of the tank to increase the pressure in the tank and keep it constant with the atmospheric pressure. The breathing valve is usually installed at the top of the oil tank.

To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.

The company adheres to the needs of customers, adheres to win-win integrity, and relies on scientific and technological innovation to continue to improve the level of logistics equipment technology and information technology, and enhance the logistics technology research and development and innovation capabilities. Based on market demand and innovation as the driving force for development, the company actively expands the field of logistics services, accelerates the extension of the logistics industry chain, and scientifically advances the diversification of the logistics industry.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.