API 650 petroleum storage tanks weld metal

This standard applies only to API 650 tank API 650 petroleum storage tanks whose entire bottom is uniformly supported and to API 650 tank in non-refrigerated service that have a maximum design temperature of 93°C (200 °F) or less.

Allowable Design Stresses
The maximum allowable design stresses for the API 650 petroleum storage tanks materials outlined in Q.2.1 shall be in accordance with Table Q-3.The values for the allowable design tensile stress given in Table Q-3 for materials other than bolting steel are the lesser of (a) 331/3% of the specified minimum ultimate tensile strength for the material or (b) 662/3% of the specified minimum yield strength, but they are 75% of the specified minimum yield strength for the stainless steel, nickel alloy, and aluminum materials. Allowable test stresses are based on the limitation of API 620 oil tank storage standard Q.8.1.3.

Define the welding sequence of API 650 petroleum storage tanks bottom plate: the welding sequence of metal vertical storage tank shall be carried out according to the procedure required by the welding scheme. Spot welding shall be consistent with the formal welding requirements, and no spot welding shall be carried out for the weld not welded. Back bar should be added to prevent deformation when welding the full length seam of middle plate, butt joint of edge plate and turtle shell joint.

Company tenet: first class quality and service to create corporate brand.Business philosophy: people-oriented, innovation, continuous improvement, the pursuit of excellence. Quality policy: carry forward the quality spirit, build a perfect quality management system, and put the quality strategy into every detail of the company's daily work.Environmental policy: waste reduction and pollution prevention, continuous improvement, and environmental protection.

The trend of international shipping development of large-scale ships and strategic joint ventures puts forward higher requirements for modern ports. Modern ports no longer use the general cargo throughput as a measure sign, and container throughput will become the main sign to measure the role and status of modern ports. The average container capacity in 2000 is 3200teu, and it is expected to be 5500teu in 2020.

Our company will accept the product quality objection registration record, pass it to the API 650 petroleum storage tanks production unit and relevant departments, and timely coordinate the supervision of product API 650 petroleum storage tanks quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.