5154 aluminum tube API standard 650 carbon and low-alloy steel tanks

In API 650 oil storage tank, when the mixing ratio of combustible medium and air reaches a certain limit, it is easy to cause explosion. Therefore, it is necessary to add API standard 650 carbon and low-alloy steel tanks external floating roof to open cylindrical steel API standard 650 carbon and low-alloy steel tanks tank. At present, the external floating roof is most suitable for large-scale API 650 oil storage tank in China, ranging from 20000, 30000, 50000 cubic meters to 100000 cubic meters.

Proof Tests for Establishing Allowable Working PressuresBecause pressures in liquid storage tanks built according to these rules vary quite markedly from the tops to the bottoms of the tanks, proof testing of these tanks presents problems not usually encountered in the construction of unfired pressure vessels–especially where the API standard 650 carbon and low-alloy steel tanks parts under investigation are located near the bottoms of the tanks. The principal difficulty is devising a test or series of tests that will reliably establish the working pressure that can be permitted on the part of the unproven design without, at the same time, imposing hazardous conditions on other parts located at higher levels in the tank.

In order to ensure the safety of the vertical storage tank, API standard 650 carbon and low-alloy steel tanks, the supplier should inspect the tank carefully before delivery. The failure of the tank body is mainly due to the weld and crack of the product. The inspection of API standard 650 carbon and low-alloy steel tanks, vertical storage tank weld and microcrack is mainly to inspect the appearance forming quality of weld. The inspection contents include weld leg height, undercut, welding deformation, weld bead, arc pit, weld straightness, etc., as well as the internal quality of weld, such as slag inclusion, porosity, incomplete penetration, crack, incomplete fusion, etc.

Customer concept: customer first. Guided by market changes and guided by customer needs, we design the optimal product solutions and provide the best after-sales service. Partners: to reach a balance of interests with all stakeholders, to build a harmonious coexistence and win-win cooperation.

The company attaches great importance to logistics services, sets up our own transport truck fleet, improves customer response capacity through the improvement of logistics capacity, and further reduces costs. Customers ordering API standard 650 carbon and low-alloy steel tanks steel from our company can not only enjoy the service of fast delivery, but also enjoy lower transportation costs. Fast, accurate, simple and efficient has always been our principle.

The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!