SI units API standard 650 unanchored tanks
BBN can provide design, manufacture and installation of API 650 large oil and crude oil storage tanks. We can build a API standard 650 unanchored tanks 7,000,000 gallon API 650 petroleum storage tank. In addition, BBN has the means to construct multiple storage tanks at the same time. We are very experienced in providing API 650 petroleum storage tanks.
Inspection of API standard 650 unanchored tanks bottom: magnetic flux leakage scanning technology is used to detect the corrosion condition of API standard 650 unanchored tanks bottom plate (such as corrosion depth and area, crack length, etc.). When there is a defect in the bottom plate of the API standard 650 unanchored tanks, the magnetic field distribution will change and the sensor can detect it. The bottom of the oil tank should be free of foreign matters and dry during testing. Weld inspection of API standard 650 unanchored tanks bottom plate: when vacuum leak test method is used to detect the tightness of oil tank bottom plate, soap water shall be applied to the weld and vacuum box shall be covered for observation.
Data Required from Manufacturer on Completed TanksIf specified in the purchase order, the Manufacturer shall supply marked copies of plans (or a separate sketch) showing the location of all plates, with a means of identifying each plate with the heat numbers. These markings shall be checked by the inspector. A copy shall be attached to the Manufacturer’s report.Check of Stress-relieving OperationThe API standard 650 unanchored tanks inspector shall check any thermal stress-relieving operation and shall be satisfied that the temperature readings are accurate and that the procedure conforms to the applicable requirements of these rules.
Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.
Our company doesn't need the cheapest quotation to choose international logistics company, but the price performance ratio will be high, the service will be good, and the transportation must be safe and punctual, which will not affect the time when the API standard 650 unanchored tanks goods arrive at the destination, and the logistics situation will be well communicated with customers in advance. Therefore, when we choose international logistics companies, we will have a look at their timeliness and service attitude in advance. It is only important to transport goods according to the requirements of customers for logistics.
