API Std 650 SUG III tanks single-welded butt joint with backing
API 650 "welded storage tanks" API Std 650 SUG III tanks is a standard developed and issued by the American Petroleum Institute (API), which specifies the minimum requirements for the design, manufacture, installation and inspection of welded storage tanks.
Requirements for prefabrication of bottom plate of large vertical API Std 650 SUG III tanks:1. The diameter of tank bottom should be enlarged by 0.1% ~ 0.15% according to the design diameter.2. The minimum dimension of edge plate along the radius direction of tank bottom shall not be less than 700mm.3. The distance between any adjacent welds of the base plate shall not be less than 300 mm.
Surface Inspection of low-pressure storage tank Component PartsBefore assembly, unless already so certified by shop inspectors, all sidewall plates or sections and roof and bottom plates shall be inspected for thickness, freedom from injurious defects, and soundness of any welded joints.Check of Dimensions of API Std 650 SUG III tanks Component PartsAll formed plates and curved sections shall be checked for conformance with the planned dimensions and cross section. For unusual repairs the inspector should keep a record of measurements taken at sufficient intervals to constitute a satisfactory record.Check of Chemical and Physical Property DataThe inspector shall check the material being assembled by the lists of the plates from the mill, their heat numbers, chemical analyses, and mechanical properties as given on mill reports and shall see that copies are available to be attached to the Manufacturer’s report.
We have Business Department, Transportation Department, Document Department, Shipping Department, E-C department, Procurement Department, Finance Department, Human Resources Department, Administration Department, Logistics Department, After-sales so on Departments. Each department performs its own duties, unites and cooperates, and contributes its greatest strength to the overall operation of the company. So as to ensure the stable and sustainable development of the company.
Ningbo port has trade and transportation with more than 50 countries and regions, such as the United States, CIS countries, Europe, Africa, Japan and South Korea, Southeast Asia, the Middle East and Hong Kong. Ningbo port has initially formed an all-round three-dimensional collection and distribution network of expressways, railways, aviation, river sea intermodal transport, water to water transfer, etc.