API standard 650 mixed material tanks slab foundations

The company has a mature technical team whose reponsibility is to design the drawing, choose suitable material and evaluate the whole production processaccording to customers’ requirement. The company is led by talents and technology, and comprehensively promotes its six business segments like steel material supply, precision steel casting, environmental protection equipment, household appliance, API standard 650 mixed material tanks steel structures and oil tank projects. Seeking new developments in new technology and business areas, and fostering a large number of industry-leading, international-level projects.In this project, an area of tank wall is constructed of ASTM A285, Grade C, steel plate that is 5/8-in. thick and has spot-radiographed, double-welded butt joints. The wall is subject to tension in a meridional direction and to compression in a latitudinal direction. The values of R1 and R2 at the point under consideration are 75 in. and 300 in. respectively. A corrosion allowance of 1/16 in. is required. The computed (meridional) tensile stress, stc, in the net thickness after deduction of the corrosion allowance is 6000 lbf/in.2.
The problem in this example is to find the maximum allowable (latitudinal) compressive stress value for the given conditions, in conformance with the provisions of API 620 tank standard 5.5.4.5.Fabricated to API Standard 650 Welded Tanks for Oil Storage Shop Assembled API standard 650 mixed material tanks storage tanks, these tanks are commonly used at oil and natural gas terminals, API standard 650 mixed material tanks processing plants, and midstream facilities located along pipelines at the pumping, compression, or metering stations. API 650 storage tanks are designed and fabricated considering operating pressures up to 2.5 PSIG, corrosion allowance, wind loading, and seismicity.Company management philosophy: integrity-based, service-oriented, excellence, affinity symbiosis. Based on quality, continuously create maximum value for customers. Always have a grateful heart, thank the society, thank family and friends for their support and help to the development of the company, thank customers for their trust, thank colleagues for their cooperation, and thank competitors for their supervision.The cone slope of the completed API standard 650 mixed material tanks foundation is 15/1000 for the general foundation and less than 35/1000 for the soft foundation. After the foundation settlement of the storage tank is basically stable, the surface slope must be greater than eight thousandths. The edge of the tank bottom should be more than 0.3 meters higher than the surrounding ground. Above the ground, the tank bottom leakage detection tube should be drawn from the foundation sand cushion and cross the foundation ring wall or the slope protection surface. The circumferential distance should be less than 20 meters, and each API standard 650 mixed material tanks should have at least 4 detection tubes.