API 650 special tank platforms, walkways, and stairways

We can process the steel materials according to your drawing. Or if you can not make drawing, please send us API 650 special tank specific data and requirements, our technical department can make design and drawing for you, and then confirm with your technician or engineer. If all is OK, our processing center will process the steel materials according to the drawing. So no matter what size and shapes you need, we can meet demands at the most time.Heat-affected zone impact specimens shall be taken across the weld and as near the surface of the material as is practicable. The API 650 special tank material specimens shall be of sufficient length to locate the notch in the heat-affected zone after etching. The notch shall be cut approximately normal to the material surface to include as much heat-affected zone material as possible in the resulting fracture. Impact test specimens shall be cooled to the temperature stated in Q.22.In Appendix E to API 650 oil storage tank, the maximum values of inertia force, pulse pressure and convection pressure are superimposed, and tend to be conservative.In GB50341, only pulse pressure is calculated for API 650 special tank tanks below 5000 m.Service concept: first time to understand customer needs, first time to solve customer worriesVision: to be the leading steel materials supplier in the worldWorking principles: Keep promises; Spare no efforts; Be practical and innovative; Pursue excellenceTalent concept: build a team with a dream and complete a dream with a team!Family culture: we rely on the principles of equality, trust, appreciation and family love to form a harmonious and warm family!In the actual welding of API 650 special tank, operators will use more arc-shaped plates for tailor-welding to better adapt to the larger volume of oil storage tanks. In order to effectively control the deformation of the welding seam of the API 650 special tank, a scientific and accurate prefabricated bottom plate is required. In the process of prefabricating the bottom plate of the oil storage tank, it is necessary to strictly follow the technical requirements for the construction of the oil storage tank. At the same time, it is also necessary to clarify the external dimensions according to its actual manufacturing standards so that it has sufficient shrinkage.