5052 aluminum tube API Std 650 mixed material tanks

API 620 Steel Oil Tank Bottom and Shell Support
The tank API Std 650 mixed material tanks under-bottom insulation shall be designed to resist the combined pressures from the product load, the overturning seismic load and the vertical seismic load. These seismic pressures may be combined by SRSS.
The bearing ring under the shell shall be designed to resist the calculated OLE peak compressive force in the tank shell due to overturning (see API 650 oil tank, Section E.6.2.2), including dead and live loads. A 33 % increase in allowable bearing stress is permitted.

There is a gap of 100 mm to 500 mm between the shell of API 650 crude oil storage API Std 650 mixed material tanks tank and the floating plate of external floating roof to ensure that there is no chuck during operation. Use API Std 650 mixed material tanks edge sealing system to reduce edge evaporation. The support legs of API 650 crude oil tank floating roof are usually movable and retractable and suspended in liquid.

In 2015, we participated in an tender for oil and casing pipe in Pakistan. Because of our professional service and company strength. The end user chose us as the final contractor of the project of 22000 meters pipes of different sizes production. It takes us about 3 months to produce all the pipes API Std 650 mixed material tanks . We use bulk vessel to ship the pipe to Karachi port. Our engineers went to Karachi port to inspect the condition along with the customer when ship arrive. The customer gave high appraise to the pipe quality and our service

The most popular standards for API Std 650 mixed material tanks are API Std 650, JIS B8501, BS2654, GB50341, etc. The formulas used in each standard are derived from the hoop stress calculation formula of membrane theory. Combined with the stress characteristics of API Std 650 mixed material tanks, plus the allowable stress, weld coefficient and additional wall thickness, the wall thickness calculation formula is complete. The allowable stress and weld coefficient are determined according to the material performance characteristics and construction technology level of each country. According to different API Std 650 mixed material tanks standards, the calculation results of tank wall thickness are sometimes quite different.

We have a professional after-sales service team, the company has developed a clear service process and service standards, after-sales service team members strictly perform after-sales procedures, comply with service standards. The most important thing is that we have set up the correct concept of after-sales service, "customer first, sincere service for users".