24m diameter API standard 650 fixed roof tanks

Our technical department plays important role in our professional communication with customers, especially those who have high technical requirements for steel materials and those who need complex further processing. Under such condition, our technician department can provide technical support in time, anylize customer design or make drawing according to customer needs rapidly, so that we can proceed smoothly. The profession of our team has won great praise of customers.Large Low-Pressure Tanks Corrosion Allowance
In cases in which the rate of corrosion is closely predictable, additional metal thickness over and above that required for the initial operating conditions shall be provided and shall be at least equal to the expected corrosion loss during the desired life of the tank.
When corrosion effects are indeterminate before the tank is designed (although they are known to be inherent to some degree in the service for which the tank is to be used), and when corrosion is incidental, localized, or variable in rate and extent, the best judgement of the API standard 650 Fixed roof tanks designer must be exercised in establishing reasonable maximum excess tank wall thicknesses. For all tanks that come under this classification, a minimum corrosion allowance of 1/16 in. shall be provided.The tank wall design of API 650 oil storage tank. Since there is no ventilation pipe directly connected with the outside on the top of the API standard 650 fixed roof tanks tank, the ventilation between the inside and outside of API 650 oil storage tank is realized by the respiration valve. The constant pressure of the respiration valve is 0.3kPa, so the pressure on the top of the tank is 0.3kPa.To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.When welding API standard 650 fixed roof tanks, in order to avoid weld deformation, it is necessary to use corresponding welding process according to the type of steel used in the tank, such as welding requirements of steel plate, welding position, etc. Reasonable arrangement of the assembly sequence, the use of subsection back welding and jump welding method, strict control of welding process parameters, rigid fixation measures, take corrective measures for deformation compensation are necessary.