API Std 650 horizontal tank deck plates

Similarities between API 650 and API 620 tanks Both tanks are used for storage purposes. Both API 620 and API 650 containers API Std 650 horizontal tank can be made of carbon steel, austenitic stainless steel and nickel alloy (only for low temperature).

Shell Stiffening Rings for Tanks That Contain Liquid: Internal or external shell stiffening rings may be required to maintain roundness when the API Std 650 horizontal tank is subjected to wind, vacuum, or other specified loads. When stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure R-1 and R.3.5.2 through API Standard 620 R.3.5.5. Three-plate laps or butt-weld junctions in the tank bottom shall be not closer than 12 in. from each other and/or the butt-welds of the annular plate.

Proper use of API Std 650 horizontal tank and precautions:
1. The API Std 650 horizontal tank must be used within the safe height range;
2. Check before use to ensure that the safety valve and breathing valve are flexible and easy to use;
3. The explosion-proof and fire-proof safety measures for oil tanks are implemented effectively;
4. The oil level in the API Std 650 horizontal tank should be accurately measured when receiving and delivering oil, so as to prevent overflow or empty;
5. In the process of receiving and sending oil, the flow rate of oil should be controlled, and it should not be too fast to avoid electrostatic accidents.

To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.

Our company is located in the Central Plains, Zhengzhou City, convenient transportation. There is the largest Xinzheng airport, welcome customers from all over the world to visit our company. Our factories are all located near the port. The logistics is very convenient, which can save the delivery time.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.