API standard 650 SUG III tanks carbon steel anchor straps
The vent pipe mouth should be 4m or more above the ground. The nominal diameter of the API standard 650 SUG III tanks API 650 petroleum storage tank vent pipe should be no less than 50mm and a flame arrestor should be installed.
Data Required from Manufacturer on Completed TanksIf specified in the purchase order, the Manufacturer shall supply marked copies of plans (or a separate sketch) showing the location of all plates, with a means of identifying each plate with the heat numbers. These markings shall be checked by the inspector. A copy shall be attached to the Manufacturer’s report.Check of Stress-relieving OperationThe API standard 650 SUG III tanks inspector shall check any thermal stress-relieving operation and shall be satisfied that the temperature readings are accurate and that the procedure conforms to the applicable requirements of these rules.
The coating on the outer wall of API standard 650 SUG III tanks can not only reflect light but also prevent corrosion. Different coatings for oil tanks have different reflective properties, and the reflective performance of coatings is expressed by reflection index. For example, the reflection index of white coating is 90.0, that of sky blue coating is 85.0, and that of light gray coating is 57.0. It can be seen that the white coating has good reflective performance, and coating the outer surface of API standard 650 SUG III tanks with white coating can reduce the evaporation consumption of the oil tank.
The formula of enterprise success is: success = strategy × organizational capability, that is, having the right direction and strong organizational capability. The core competence of an enterprise depends on three pillars: first, talents (talent echelon); second, core values of enterprise culture; third, organizational governance model. If the enterprise is a tree, then the core values of talents, corporate culture and organizational governance mode are just like the root of the tree. With them, the enterprise will flourish and grow forever.
Japan is a typical shipping first, and its raw materials are imported from Oceania, central and South America and other Asian countries. Most of the API standard 650 SUG III tanks steel produced is exported to China and other Asian countries, and a small amount is exported to America. Shipping is the main way of its API standard 650 SUG III tanks steel international transportation. According to the data, steel goods account for about 20% of the total sea freight in Japan. The domestic transportation of Japanese steel is mainly truck.
Compared with other fast-moving consumer goods, steel consumption is obviously different, with a wide range of use and a long service life. Therefore, the quality and service of steel materials are particularly important. Service is always one of our top concerns, especially after-sales service. We have mature after-sales service team, and can help you solve problems professionally during application of the steel materials.
