A516 Gr 450 plates API 650 mechanically-anchored steel tanks

The tank shall be filled with water to the design liquid level unless height is limited as noted in API 620 standard Q.8.1. After the tank is filled with water and before the pneumatic pressure is applied, anchorage, if provided, shall be tightened against the hold-down brackets. All welds in the API 650 mechanically-anchored steel tanks shell, including the corner weld between the shell and the bottom, shall be visually checked for tightness.

In Appendix E to API 650 oil storage tank, the maximum values of inertia force, pulse pressure and convection pressure are superimposed, and tend to be conservative.In GB50341, only pulse pressure is calculated for API 650 mechanically-anchored steel tanks tanks below 5000 m.

In December of 2015, our regular India customer sent us an inquiry for API 650 mechanically-anchored steel tanks pipe. The inquiry requires no negative tolerance in both pipes’ outer diameter and pipe wall. After two weeks’ discussion, he put the order of 275 tons to us. The pipes are finished within just one month. Our customer come to our factory to inspect the quality and tolerance, all the products are well meet his demand. The pipes are arriving to Nhava Sheva port, customer is very happy with our products and service during the process.

The seal of floating roof API 650 mechanically-anchored steel tanks is a device used to reduce the evaporation loss of the storage liquid in the annular space between the tank wall and the outer ring plate of the floating roof. The common sealing forms include mechanical seal, elastic filling seal, lip seal and secondary seal. No matter what kind of seal, the seal must be combined with the floating roof effectively to reduce the evaporation loss of the liquid in the floating roof.

The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.