1060 aluminum shapes API standard 650 horizontal tank
For all API 620 crude oil tank other materials, the impact test temperature shall be at least 30°F colder than the design metal temperature. Alternately, materials impact tested at the design metal temperature or lower with Charpy impact test energy value of 25 ft-lb (average), 20 ft-lb (minimum) are acceptable for design metal temperatures above –40°F. API standard 650 horizontal tank materials with an energy value of 30 ft-lb (average), 25 ft-lb (minimum) are acceptable for design metal temperatures of –40°F or lower.
These API 650 documents will define the bases of design, operation, inspection, tests, examinations, and maintenance of an API standard 650 horizontal tank industrial facility. Bidders will study and analyze all this API 650 documentation, both during the preparation of the quotation and during the execution of each project activity.
We have lots of successful cases, for example in July 2015, we exported 5714 tons ASTM A36 mild steel plate to Peru. After receiving the plates and putting then into use, our customer spoke highly of the ASTM A36 mild steel plate quality. In addition, the customer also introduced us an Venezuela customer, who bought 933 tons A36 steel API standard 650 horizontal tank plate from us. And then in Mar. 2016, due to the first cooperation in July 2015 is very successful. The customer is very satisfied with our product quality and comprehensive service. This time, the customer place an 3989 tons order directly.
}Sand blasting and derusting of API standard 650 horizontal tank uses compressed air as power and SiC, pomegranate sand and quartz sand as spraying materials to form high-speed jet beam, which is used to remove rust and dirt on the surface of metal storage tank and improve the binding force of workpiece with coating and plating material. Sand blasting is often used in API standard 650 horizontal tank construction.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
