CSA G40.21 grade 300W plates API standard 650 open-top tanks

Lateral braces between outer bay rafters must be provided if asymmetrical structural shapes are used for rafters and if the API standard 650 open-top tanks API 650 tanks are located in areas subject to earthquakes. The bracing must be adequately sized for the seismic zone specified.

The finned tube heating device for high temperature heat transfer oil for large API standard 650 open-top tanks has the advantages of convenient inspection and maintenance. The high-efficiency fin heating coil assembly is composed of spirally arranged finned coils. The fins are mainly arranged in the straight pipe section, and the whole assembly is supported by several angle steel supports. The high-efficiency fin heating coil component can enter and exit from the manhole of the API standard 650 open-top tanks, which is convenient for maintenance and repair.

Density of API standard 650 open-top tanks Liquid Stored
The density of the liquid stored shall be its maximum density within the range of design temperatures, but no less than 29.3 lbf/ft3 for methane, 34.21 lbf/ft3 for ethane, and 35.5 lbf/ft3 for ethylene.
Design Metal Temperature
The design metal temperature of each component exposed to the liquid or vapor being stored shall be the lower of the temperatures specified as follows: The design metal temperature of the components of the API 620 single-wall tank or the inner tank of a double-wall tank shall be the minimum temperature to which the tank contents shall be refrigerated, including the effect of subcolony at reduced pressure.

Our company's technical department is the core department of the whole company. There are a group of very professional technical personnel. They provide some architectural drawings according to the ideas of customers, and they are responsible for how to select the right materials. Including the evaluation of steel products such as multi steel plate, API standard 650 open-top tanks and steel pipe, grasp the whole production process, and strictly follow the production standards and customer quality requirements.

In the process of API standard 650 open-top tanks steel transportation, enterprises often use railway transportation, highway transportation, water transportation and other ways to transport. According to the cargo owner's requirements on the timeliness of the goods and the different transportation routes, our company will choose API standard 650 open-top tanks different modes of transportation. According to the specific needs of customers, or specify the mode of transportation.