Bottom leakage of API standard 650 austenitic stainless steel storage tanks

API standard 650 austenitic stainless steel storage tanks Manhole: The manhole is used for the operator to enter and exit the oil tank for inspection, cleaning and repair. For the convenience of personnel access, the installation position of the manhole is generally on the center line of the oil tank bottom, and the vertical oil tank is installed at the lowest layer of the tank wall. API standard 650 austenitic stainless steel storage tanks Light-transmitting hole: Light-transmitting hole is also called day-lighting hole. It is used for lighting and ventilation when inspecting, repairing and scrubbing the oil tank. It is generally installed on the top of the oil tank above the inlet and outlet pipes.

The ring of API standard 650 austenitic stainless steel storage tanks annular plates shall have a circular outside circumference, but may have a regular polygonal shape inside the tank shell with the number of sides equal to the number of annular plates. These pieces shall be butt-welded in accordance with API Standard 620 R.7.1.1, Item b. The plates of the first shell course shall be attached to the annular bottom plates by welds as required by API Standard 620 5.9.5 except when a full penetration weld is used or required.

This specification, in conjunction with API 650 Standard, prescribes minimum standards for the API standard 650 austenitic stainless steel storage tanks design, supply, fabrication, erection, and testing of field erected welded steel storage tanks complete with accessories as specified herein and as shown on attached Datasheets and/or Drawings.

Our company has a comfortable office environment, covers a large area, can accommodate hundreds of people working at the same time. All kinds of green plants are placed in the company, with a healthy office environment. Our company also has gym, table tennis, leisure bar, kitchen, refrigerator, microwave oven and other equipment. Humanized construction provides comfortable office environment for employees.

Hot rolled plates are known for their superior mechanical properties over commodity grades of merchant bar. The hot rolled API standard 650 austenitic stainless steel storage tanks plates products are made to specific chemistry and mechanical properties ranges, allowing them to be used in engineered applications. Resulting shafts, axles, and gears can be used in the automotive API standard 650 austenitic stainless steel storage tanks industry and agriculture equipment. A36 mild steel has good strength, formability, and excellent welding properties. We also can supply welding, fabricating, and bending service.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!