API standard 650 flat-bottom oil storage tanks manufacturer's standard drain

For areas with high groundwater levels, the operator should take anchoring and anti-floating measures for buried horizontal API standard 650 flat-bottom oil storage tanks oil tanks; API 650 oil tanks can be used for heavy fuel oil, heaters are separately designed, and buried tank material outlets are installed with bottom valves and connections. consider.

The normal operation of API standard 650 flat-bottom oil storage tanks includes receiving oil, storing oil, sending oil and measuring oil. The correct use and operation of oil storage tank is directly related to the production safety and oil loss of oil tank. In order to use and operate the API standard 650 flat-bottom oil storage tanks correctly, it is necessary to be familiar with and master the structure and performance of the API standard 650 flat-bottom oil storage tanks and its accessories, such as the maximum storage capacity of the oil tank, the pressure range that can bear and the safety fabrication specification.

Stamping of API 620 Storage Tank PlatesBefore plates required to be stamped by the steel mill are used, the inspector shall see that they bear the stamp. In laying out and cutting the API standard 650 flat-bottom oil storage tanks plates, at least one set of the original material identification markings should, if possible, be left where it will be plainly visible when the tank is completed. Should the identifying marks be obliterateSpot radiographic or ultrasonic examination shall be not less than 6 in. extending along the weld. Spot radiography shall comply with the standards given in 7.15.1.3. Where spot radiographic or ultrasonic examination is applied at joint intersections, the surface shall be prepared and examined for a distance of 3 in. on each side of the intersection, making the minimum length of examination 6 in. on the horizontal weld and 3 in. on the vertical weld.

Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.

In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the API standard 650 flat-bottom oil storage tanks steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.