API Std 650 SUG I tanks configuration

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.The tank 20-in. inside-diameter nozzle shown in Figure F-6 is located in solid plate in the sidewall of a cylindrical storage tank 148 ft in diameter in an area where the thickness of the wall plate, tw, is 11/2 in. A corrosion allowance of 0.10 in. is required on all surfaces of the tank exposed to the stored liquid. The total internal pressure, Pl + Pg, at the center of the opening is 24.9 lbf/in.2 gauge. The thickness of the API Std 650 SUG I tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 1.44 in.API 650 is constructed from carbon steel, austenitic duplex stainless steel, and API Std 650 SUG I tanks aluminium A Welding Certification is stipulated by American Society of Mechanical Engineers (ASME), Section 10. There is a required inspection, no third party. The inspection cost is the cost of the NDE.Service concept:Customer satisfaction is our value. Thank customers for their trust, respect their rights and interests, care about their needs, understand their concerns, realize their satisfaction and promote their success. Sincere and friendly, warm and thoughtful, relaxed and pleasant, considerate and tolerant. Attentive service, sincere care, professional excellence. The first-class famous products API Std 650 SUG I tanks at home and abroad gather, and the outstanding charm of the East and the West radiates! Specialization, standardization, refinement, kinship.Operation points of sand blasting rust removal for metal storage tank, API Std 650 SUG I tanks:
1. The equipment should be as close as possible to the workpiece to be processed, so as to reduce the pipeline length and pressure loss, avoid excessive pipeline wear, and facilitate the construction personnel to contact each other.
2. The jet pipe should be straight as much as possible to reduce the concentrated wear at the bend. The wear direction of the bend should be changed frequently to prolong the service life of the pipe.
3. Strictly control the process parameters.