API Std 650 liquid-storage tanks appurtenances

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the API Std 650 liquid-storage tanks project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of API Std 650 liquid-storage tanks customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.Vertical Storage Tanks Security against Damage
The assemblies of relieving devices shall be secured against damage in service, the effects of storms, or mishandling. Access ladders and platforms that meet API Std 650 liquid-storage tanks plant safety rules are suggested.
Vacuum-relieving Devices
A vacuum-relieving device, when used, shall be as direct in inflow as possible with no pockets where moisture can collect, and it shall have no piping except a weather hood ahead of the inlet. An adequate vacuum-air inlet shall also be provided.API 650 is used to store products such as crude oil, gasoline, chemicals, and produced water. BBN has extensive experience in API Std 650 liquid-storage tanks API 650 tanks with diameters between 8'-300', which are suitable for refineries, terminals, pipeline facilities and other projects.The company's business philosophy: customer satisfaction is the most important measure of our work performance; employees are the company's most important wealth; the improvement of employees' quality and professional knowledge is the growth of the company's wealth; employees' welfare and living standards are the concrete embodiment of the company's business performance; product and service quality are the lifeblood of the company's development; brand is the company's products and A mirror of service; recognition of the market is the foundation of the company's survival.Requirements for prefabrication of the top of large vertical API Std 650 liquid-storage tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.