120ft diameter API Std 650 mechanically-anchored tanks

Our company's business departments are a group of excellent and hard-working employees, who constantly carry out knowledge updating and steel knowledge training every day, only to provide better and professional services to customers.In cylindrical tank walls, the longitudinal weld joints in adjacent shell courses, including compression ring welds, shall be offset from each other a minimum distance of 12 in. The butt-weld around the periphery of a thickened insert plate, or the fillet weld around the periphery of a reinforcing plate, shall be at least the greater of 10 times the shell thickness or 12 in. from any butt-welded seam or the bottom-to-shell or roof-to-shell joint. As an alternative, the insert plate (or the API Std 650 mechanically-anchored tanks reinforcing plate in an assembly that does not require stress relief) may extend to and intersect a flat-bottom-to-shell corner joint at approximately 90 degrees.API 650 is constructed from carbon steel, austenitic duplex stainless steel, and API Std 650 mechanically-anchored tanks aluminium A Welding Certification is stipulated by American Society of Mechanical Engineers (ASME), Section 10. There is a required inspection, no third party. The inspection cost is the cost of the NDE.Our company was founded in 2009, and has been committed to steel business since its establishment. Over the years, the company's performance shows a good development trend, with a wide range of customers in the government, domestic and foreign markets. The company has always been in line with the tenet of "based on trust and win with quality", focusing on the market demand, with a long-term vision, with years of hard work and trustworthy operation, and the support of the majority of API Std 650 mechanically-anchored tanks businesses and customers, has won the unanimous praise and trust of the industry and customers!Prefabrication requirements of large vertical API Std 650 mechanically-anchored tanks accessories: the prefabrication shall be deepened as far as possible in strict accordance with the requirements of construction drawings and specifications, according to the principle of convenient installation and construction, as much as possible to reduce the installation workload, especially the workload of high-altitude operation. The prefabricated accessories shall be strictly inspected to ensure the quality and make marks. In addition, effective measures should be taken to prevent deformation, damage and corrosion during storage, transportation and stacking on site.