API 650 SUG III tanks top wind girder

Atmospheric API 650 SUG III tanks inspection includes annual inspection and comprehensive inspection. Annual inspection is an inspection during operation to ensure the safety of atmospheric storage tanks during the overhaul period, at least once a year. Comprehensive inspection is a more comprehensive inspection of atmospheric storage tanks according to a certain inspection cycle. The inspection content of metal atmospheric API 650 SUG III tanks includes the safety management of the storage tank, the inspection of the tank body and its operating conditions, etc.

API 650 SUG III tanks basic components are those that contain the vaporized liquefied gas from the stored refrigerated liquid but primarily operate at atmospheric temperatures because of insulation system design and natural ambient heating. These components shall comply with the basic rules of this standard. Examples of such components are the outer wall and roofs of double-wall tanks and roof components above an internally insulated suspended deck. The API 620 tank materials requirements are based on the storage of refrigerated products at the design metal temperature.

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API 650 SUG III tanks hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.