5052 aluminum plate API standard 650 mixed material tanks

The structure of the API standard 650 mixed material tanks foundation mainly includes the insulating anticorrosion layer on the top surface of the foundation, the tank wall support, the edge retaining structure, the sand cushion, the oil and water barrier, the detection signal tube and other structures. The construction materials and requirements of each basic structure of the storage tank are different. After the structure of the API standard 650 mixed material tanks foundation is built in accordance with the construction requirements, the settlement of the storage tank foundation needs to be observed, and the uneven settlement value of the storage tank foundation should be within the allowable safety range.

Investigation of Subgrade
On actual steel storage tank sites to be used, test borings or test pits, or both, may be made at the direction of a competent engineer who will specify the number and location. They need not be equally spaced but should be laid out to uncover possible weak spots.
In general, test loadings of subgrade at the bottom of test pits need be resorted to only when such heavy loading as may be imposed by footings for major column supports for spheres or similarly elevated API 620 low-pressure tanks is specified. Results may be deceptive if average load-bearing capacity over a considerable area is wanted. All field data shall be recorded with maps, and copies shall be supplied to all engineers concerned with design, erection, and later operation.

The vent pipe mouth should be 4m or more above the ground. The nominal diameter of the API standard 650 mixed material tanks API 650 petroleum storage tank vent pipe should be no less than 50mm and a flame arrestor should be installed.

Advanced typical figures and typical deeds are the embodiment and symbol of API standard 650 mixed material tanks enterprise spirit, outstanding ideas and vivid images, with strong demonstration, radiation and transmission effect. Without distinctive typical characters, there is no unique enterprise culture. In carrying out the construction of enterprise culture, the advanced enterprise culture should be typified. Vigorously excavate, discover, cultivate and summarize the company's API standard 650 mixed material tanks advanced models.

Our company has been established for 20 years and has accumulated rich experience in steel products. At the same time, it is often exported to Southeast Asia, Africa, South America and other countries. So you can rest assured that our API standard 650 mixed material tanks products and our prices are very favorable. Because we have our own factory, there is no other cost, we can also carry out machining and so on.