CSA G40.21 grade 260W plates API standard 650 vertical welded storage tanks

As an experienced world class steel materials supplier and exporter, logistics and fast delivery is a crucial step to us. Our logistics department and shipping department take the responsiblity to allocate and transport steel materials from our mill and warehouse to customer port or designated destination. The cooperation of the two departemts are excellent and that powerfully support our fast delivery, and strive for shorter time for customers to receive steel materials.

The process parameters should be strictly controlled in sand blasting of API standard 650 vertical welded storage tanks. The working pressure of abrasive chamber is between 0.5 and 0.6a, and the outlet pressure of air compressor shall not be lower than 0.6 WPa. According to the test results, the distance between nozzle and workpiece shall be controlled at 80 - 200 mm and spraying angle of 30 ~ 75°is appropriate.

The thickness of the API standard 650 vertical welded storage tanks annular bottom plates shall be in accordance with Table Q-4 (for steel or aluminum, as applicable). The thicknesses shown are minimums. The ring of annual plates shall have a circular outside circumference, but it may have a regular polygonal shape inside the tank shell with the number of sides equal to the number of annular plates. These pieces shall be butt-welded in accordance with Q.7.1.1, Item b. The plates of the first shell course shall be attached to the annular bottom plates by a weld as required by API 620 oil tank 5.9.5 except when a full-penetration weld is used or required (see Q.7.1.1). Butt-welds in annular plates shall be not closer than 12 in. from any vertical weld.