ASTM A671 pipe API standard 650 anchored tanks

The API standard 650 anchored tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.The thickness of the overburden on the top of the API 650 oil tank should not be less than 0.5m. The surrounding backfill with clean sand or fine soil should be no less than 0.3m thick; the API 650 oil tank API standard 650 anchored tanks operation platform ladder selection unit is considered in a unified manner. The buried operation well is designed for buried horizontal oil tanks, and the two are compatible.We cooperated with the Peruvian government for many years. And supply them large diameter steel pipes and pipe fittings to support their Hydropower Station Projects. We do 100% UT, RT, Hydraulic test and so on tests for the API standard 650 anchored tanks steel pipes. And do PT, MT and so on tests for the pipe fittings. We published "Welding Procedure Qualification report" after production. And our mill will keep the test record in the documentary department for 5 years. If meet any problems in following application, we can check the test record easily and assist to solve problems at the first time.When the API standard 650 anchored tanks is welded, the weldment should be fixed rigidly. After welding, when the weldment is cooled to normal temperature, the rigid fixation can be removed, which can effectively prevent angular deformation and wave deformation. Although some measures have been taken, the welding deformation of API standard 650 anchored tanks is still unavoidable, so it is necessary to take corrective measures to compensate the deformation. Mechanical correction is to make the parts easy to deform in the welding process by mechanical or other rigid materials to produce simple deformation, so as to restore the state before welding.Since its establishment, the company has been deeply supported and loved by customers with its unique business philosophy and business model. The company has always adhered to the tenet of "credibility first, integrity-based, quality first" and sincerely serves new and old customers. At the same time, it keeps pace with the times based on market orientation, continuously expands offline channels, and gradually establishes a complete online E-commerce business management platform. We will always promote our after-sales service to make client satisfied with our goods.