ASTM A285 plates API 650 petroleum storage tanks

Oil, Gas, Chemical, Water, and Bio-Fuel storage. Maximum of the most common welded steel tanks used in industry are designed following API 650. Tanks typically found in Refinery API 650 petroleum storage tanks tank farms, Terminals, Pipelines, and other process facilities use these tanks.

In this project, a cylindrical tank 62 ft 6 in. in diameter is designed for an internal pressure of 4 lbf/in.2 gauge in the vapor space. The plate material is ASTM A131 steel with appropriate grades for different plate thicknesses in accordance with Table 4-1 for a design metal temperature less than 65°F but not less than 25°F. No corrosion allowance is required for any portion of the tank. The top course of the butt-welded cylindrical sidewall is 1/4 in. thick. The roof is a single lap-welded spherical dome with an internal radius of 50 ft and a thickness of 1/4 in. The maximum design liquid level is 6 in. below the plane of the juncture of the tank API 650 petroleum storage tanks roof and sidewall.

API 650 petroleum storage tanks Drain hole: The drain hole is generally installed at the bottom of the oil tank, used to remove sludge when cleaning the oil tank, and usually used to drain the sewage in the tank. API 650 petroleum storage tanks Safety valve: The role of the safety valve is to play a safety role when the breathing valve fails during the operation of the oil tank. Its working pressure is slightly higher than the pressure of the breathing valve, which can prevent the tank from being damaged due to the high positive or negative pressure in the tank. The safety valve is usually installed in the middle of the API 650 petroleum storage tanks top.

Company management philosophy: integrity-based, service-oriented, excellence, affinity symbiosis. Based on quality, continuously create maximum value for customers. Always have a grateful heart, thank the society, thank family and friends for their support and help to the development of the company, thank customers for their trust, thank colleagues for their cooperation, and thank competitors for their supervision.

The company's logistics department has the ability to monitor the whole process of logistics. We monitor the goods in transit through advanced information technology and communication technology, timely discover and handle problems in the transportation process, and ensure the steel materials are delivered to the destination in a timely and safe manner. The professional logistics team provides powerful support for good comments of customers and good reputation of the company.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.