API 650 self-anchored flat-bottom tanks roof support legs sleeves

The API 650 self-anchored flat-bottom tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

This standard applies only to API 650 tank API 650 self-anchored flat-bottom tanks whose entire bottom is uniformly supported and to API 650 tank in non-refrigerated service that have a maximum design temperature of 93°C (200 °F) or less.

In Nov, 2018, our Mozambique customer purchased from BBN company 500 tons carbon steel Q235B steel structure for building 10 units of gas station. We have been cooperate more than 5 years for providing plate and pipes and API 650 self-anchored flat-bottom tanks profile as beginning, and they are very satisfied with all the received Cargo. We extend in-house cutting, welding, grinding, bending and certification and testing of our products, on client demand. If you are interested in our steel structures or steel plate price, welcome to contact us.

API 650 self-anchored flat-bottom tanks, Vertical oil storage tank is an important equipment for many enterprises to carry out production, which provides important support and help for the storage of many reagents. Vertical storage tank is generally used as atmospheric pressure vessel. Advantages: the filling rate of cylindrical structure is second to that of spherical tank, and the largest volume of the storage tank can be made into tens of thousands of cubic meters. The structure is simple and the construction requirements are relatively low.

We have a professional after-sales service team, the company has developed a clear service process and service standards, after-sales service team members strictly perform after-sales procedures, comply with service standards. The most important thing is that we have set up the correct concept of after-sales service, "customer first, sincere service for users".