API 650 aluminum storage tanks pontoon design

The insert plate weld shall not cross any shell seams and shall be at least the greater of 10 times the shell thickness or 12 in. from any other weld in the API 650 aluminum storage tanks shell including shell seams, shell-to-bottom weld or attachment welds. The butt weld around the periphery of the plate shall be examined over 100% of its length by both liquid penetrant method and radiographic method. The liquid penetrant examination is required on the root pass, on the back-gouged surface, and on the inside and outside finished weld surfaces. Additionally, the weld shall be vacuum box leak tested.

Design calculations and drawings required API 650 aluminum storage tanks for the fabrication and erection of each API 650 tank. A drawing index for each API 650 tank is required and shall be re-submitted each time drawings are revised and re-issued.

In 2015, we participated in an tender for oil and casing pipe in Pakistan. Because of our professional service and company strength. The end user chose us as the final contractor of the project of 22000 meters pipes of different sizes production. It takes us about 3 months to produce all the pipes API 650 aluminum storage tanks . We use bulk vessel to ship the pipe to Karachi port. Our engineers went to Karachi port to inspect the condition along with the customer when ship arrive. The customer gave high appraise to the pipe quality and our service

Strictly controlling the temperature in the API 650 aluminum storage tanks can effectively reduce the volatile consumption of oil in large oil storage tanks. Because the higher the temperature in the oil storage tank, the stronger the activity of oil molecules and the greater the volatilization consumption of the oil. Therefore, the temperature in the API 650 aluminum storage tanks must be reduced as much as possible. It is possible to reduce the direct sunlight temperature by painting white anticorrosive paint with good light reflectivity. It is also possible to use spray equipment to wash the top and wall of the API 650 aluminum storage tanks with water flow to reduce the volatilization consumption of the oil in the storage tank.

Our company will accept the product quality objection registration record, pass it to the API 650 aluminum storage tanks production unit and relevant departments, and timely coordinate the supervision of product API 650 aluminum storage tanks quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.