9m diameter API standard 650 flat-bottom oil storage tanks

The API 650 tank Standard has the built in flexibility to be used in building tanks to store a wide variety of products while ensuring the structural stability of the API standard 650 flat-bottom oil storage tanks tank.

The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.

The tank 20-in. inside-diameter nozzle shown in Figure F-6 is located in solid plate in the sidewall of a cylindrical storage tank 148 ft in diameter in an area where the thickness of the wall plate, tw, is 11/2 in. A corrosion allowance of 0.10 in. is required on all surfaces of the tank exposed to the stored liquid. The total internal pressure, Pl + Pg, at the center of the opening is 24.9 lbf/in.2 gauge. The thickness of the API standard 650 flat-bottom oil storage tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 1.44 in.

Define the welding sequence of API standard 650 flat-bottom oil storage tanks bottom plate: the welding sequence of metal vertical storage tank shall be carried out according to the procedure required by the welding scheme. Spot welding shall be consistent with the formal welding requirements, and no spot welding shall be carried out for the weld not welded. Back bar should be added to prevent deformation when welding the full length seam of middle plate, butt joint of edge plate and turtle shell joint.