ISO 630 grade E275 quality B plates API Std 650 self-anchored tank

Impact Test Requirements for Oil storage tanks Primary Components
All API Std 650 self-anchored tank primary components of 9% or 5% nickel steel shall be impact tested in accordance with Q.2.2.2 through Q.2.2.4. Impact testing is not required for primary components of austenitic stainless steel, nickel alloy, and aluminum materials. Welds in high-alloy (austenitic) stainless steel shall be impact tested if required by Q.6.3.
Impact testing of plates, including structural members made of plate, shall comply with the following:a)Impact test specimens shall be taken transverse to the direction of final plate rolling. b)Charpy V-notch specimens shall be cooled to a temperature of –320°F for A353, A553, and A645 steels for impact testing.For areas with high groundwater levels, the operator should take anchoring and anti-floating measures for buried horizontal API Std 650 self-anchored tank oil tanks; API 650 oil tanks can be used for heavy fuel oil, heaters are separately designed, and buried tank material outlets are installed with bottom valves and connections. consider.Our client purchase more than 900 tons pipe API Std 650 self-anchored tank from India. And we do the inspection for each one pipe before shipment.During the inspection, the inspector saw that the surface of the square pipe kept the original color of the stainless steel, no fracture, no depression and other quality defects was found.The factors affecting the "small breathing" loss of API Std 650 self-anchored tank are: 1. It is related to the change of temperature difference between day and night. The greater the change of temperature difference between day and night, the greater the loss of "small breathing"; on the contrary, the smaller the change of temperature difference between day and night, the smaller the loss. 2. It is related to the sunshine time of the oil storage tank. The longer the sunshine, the more the "small breathing" loss; otherwise, the less the loss.After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!