Internal structural members of API 650 ground supported flat-bottom tanks
The interior of API 650 storage tanks to be internally lined or coated must have all edges rounded to a minimum of 3 mm radius. Internal welds must be completely seal welded, ground smooth, and free from API 650 ground supported flat-bottom tanks surface porosity, pockets, and high spots. Remove weld spatter. Vendor as specified on API 650 storage tanks drawing must perform additional surface preparation.
API 620 Tank Standard Post-heat Treatment (Stress Relief)The post-heat treatment now performed on pressure vessels is of established value, although the mechanism by which the improvement is realized may be open to debate. Post-heat treatment of API 650 ground supported flat-bottom tanks tank sections when the plate thickness exceeds 11/4 in. is required as stated in 5.25. In special cases, the possibilities of post-heat treatment after erection should be explored. Post-heating an insulated tank may be possible if an ample source of heat is readily available and if the rigidity of the tank is adequate.The thermal stress-relief treatment performed on pressure vessels is recognized as a means for reducing the probability of brittle failures.
Inspection of weld and micro crack of API 650 ground supported flat-bottom tanks: the inner and outer surface of API 650 ground supported flat-bottom tanks, weld and heat affected zone shall be observed by naked eyes first. 100% ultrasonic testing or 100% penetrant testing are carried out for butt welds of API 650 ground supported flat-bottom tanks. For the defects found by 100% magnetic particle inspection, dye detection, 100% ultrasonic inspection or 100% penetrant inspection, the radiographic inspection shall be used again to ensure the accuracy of the test results.
Enterprise Motto:Integrity, harmony, dedication, innovation and developmentAbility is the cornerstone of success; action is the ladder of successGrow with the enterprise; progress with the enterpriseGive a platform to those who actually do things and a stage to those who successfully do thingsDare to be the first, to pursue excellence.
Facing the new situation and facing new goals, the company revolves around the sixteen-character development policy of “prioritizing production preservation, society-oriented, market operation, and brand creation and efficiency”. Layout the country in accordance with the modern logistics model, and accelerate the establishment of a modern integrated steel enterprise integrating steel storage, transportation, processing, and distribution.
The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.