EN S355 plates API 650 flat-bottom tanks
During the use of API 650 flat-bottom tanks, the tank material is prone to crack and leakage under the action of pressure, corrosion, wear and other conditions. Especially in the oil producing area, the temperature difference in four seasons is large and the natural environment is bad, which will accelerate the consumption of oil storage tank and cause many potential safety hazards. Therefore, the API 650 flat-bottom tanks must undergo strict inspections before being put into use after the production and installation are completed, so as to avoid cracks and leakage in short-term use and affect production safety.
API 650 flat-bottom tanks Visual InspectionUpon completion of all the foregoing tests, the pressure in the tank shall be released and a thorough visual inspection shall be made of both the inside and outside of the tank, giving particular attention to all internal ties, braces, trusses, and their attachments to the walls of the tank. Anchors shall be checked for snug tightness and adjusted if required. Anchor threads shall be fouled by peening or tack welding to prevent loosening. In lieu of thread fouling, double nuts may be used.Rate of Water Filling and Water TemperatureThe rate at which water is introduced into a tank for a hydrostatic test shall not exceed 3 ft of depth per hour. The foundation, venting equipment, or other conditions may limit the water filling to a lower rate. Pressure shall not be applied above the surface of the water before the tank and its contents are at about the same temperature.
Structural features of API 650 double-layer oil tank: steel glass fiber reinforced plastic double-layer structure, special processing method is adopted between the API 650 flat-bottom tanks internal steel shell and glass fiber reinforced plastic layer, so that a gap of 0.1 mm is created between the internal and external layers. Even if the API 650 oil storage tank leaks, it can ensure that the contained dangerous substances only flow in the gap, and will not immediately overflow the external environment.
To the society: With the development of the company, BEBON has always adhered to the development mission of "developing heavy industry for the benefit of all mankind; improving the environment and achieving sustainable development”, operating with integrity and paying taxes in accordance with law.For our employees, the company fully respect employee value, pursuing mutual development of enterprise and employees.
The company adheres to the business philosophy of "good quality, customer first, honesty and trustworthiness", and strives to provide customers with high-quality API 650 flat-bottom tanks products and excellent services. Our company's products API 650 flat-bottom tanks are widely used in petroleum, chemical, power station, boiler and other industries, mainly used in reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear energy reactor pressure shells and other equipment.
