API Std 650 welded steel storage tanks with self-supported roofs

Some defects may be found after the regular safety inspection for the API Std 650 welded steel storage tanks. The common API Std 650 welded steel storage tanks defects are: Tank cracks, tank welding defects. The cracks on the base metal, surface and near surface of the tank wall shall be eliminated by grinding with circular arc, and then magnetic particle inspection or re inspection shall be carried out. Cracks in heat affected zone: generally, grinding method is used to eliminate cracks, and magnetic particle or dye flaw detection is used to confirm that there is no crack, and then repair welding or grinding smooth transition.

Design of a Double-wall Tank
The outer bottom, shell, and roof of a double-wall tank shall enclose an insulating space around the bottom, shell, and roof or insulation deck of the inner tank that contains the stored liquid. The annular space shall be maintained at a low positive pressure, which necessitates that the enclosure be vapor-tight. The Purchaser shall specify the design metal temperature and pressure of the inner tank and may specify the design temperature and pressure of the outer tank API Std 650 welded steel storage tanks. The Purchaser shall state the specific gravity of the content to be stored, roof live loads, wind load, earthquake load where applicable, and corrosion allowance, if any.

API 650 is the standard for welded tanks for oil storage. It specifies the design, manufacturing, welding, inspection and installation requirements of oil tanks. API 650 API Std 650 welded steel storage tanks is widely used in storage tanks with internal pressure less than or equal to 2.5 PSI, used to store products such as crude oil, gasoline, chemicals, and produced water. BBN has extensive experience in API Std 650 welded steel storage tanks API 650 tanks with diameters between 8'-300', suitable for refineries, terminals, pipeline facilities and other customers.

On November 1st, our company organized some of company staff to visit Zhengzhou Children Welfare Institute, and gave children cookies and toys, as well as concerns to the Children. With the development of the society, disabled children gets increasing concerns and help from all walks of life. Fortunately, Chinese Government gives high concern to the handicapped children and has built Children Welfare Institutes all over the country to guarantee their lives.

S355J2 hot rolled steel plate executive standard: EN10025-2S355J2 hot rolled steel plate delivery status: control binding, normalizing rolling, normalizingThe European standard S355J2 hot rolled steel plate is available from API Std 650 welded steel storage tanks stock and can be cut and processed according to the requirements of customers; the futures can be produced according to your requirements, and our S355J2 hot rolled steel plate price is preferential and the delivery time is fast, welcome to contact and purchase.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!