API Std 650 storage tank fabrication requirements

API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API Std 650 storage tank. It can be any tank size.

Anti corrosion of API Std 650 storage tank:
After using for a certain period of time, it is necessary to check the corrosion protection of the API Std 650 storage tank. If necessary, the outer wall of the metal oil tank should be painted with new anti-corrosion paint to ensure that the outer wall of the API Std 650 storage tank does not fall off and has good waterproof and rust resistance.
API Std 650 storage tank cleaning:
The long-term use of API Std 650 storage tank will produce impurities on the tank wall and deposit on the tank bottom, resulting in tank corrosion to leakage. According to the safety standard of oil tank, the API Std 650 storage tank shall be cleaned and derusted regularly to ensure the quality of oil stored and the safety of oil tank equipment.

Production Weld Tests
Production weld test plates shall be welded for API Std 650 storage tank primary-component butt-welded shell plates when welding procedure qualifications are required to be impact tested per Q.6.2 and Q.6.3. The number of production weld tests shall be based on the requirements of Q.6.6.3 and Q.6.6.4. The locations impact tested (i.e., HAZ and/or weld deposits) shall likewise be the same as required for weld procedure qualifications per Q.6.2 and Q.6.3. Weld testing shall be in accordance with Q.6.6.5. Test plates shall be made from plates produced only from the heats that are used to produce the shell plates for the large welded steel tank.

In the final analysis, the market competition is the competition for customers. Whether selling products or services, the final customer satisfaction is the standard to test the success or failure of marketing work. The so-called after-sales service is to fully understand customers, study customer psychology, pay attention to after-sales details, improve work shortcomings, improve service quality, and Exchange customer brand loyalty through the whole process of quality service.

In the process of API Std 650 storage tank steel transportation, enterprises often use railway transportation, highway transportation, water transportation and other ways to transport. According to the cargo owner's requirements on the timeliness of the goods and the different transportation routes, our company will choose API Std 650 storage tank different modes of transportation. According to the specific needs of customers, or specify the mode of transportation.