API Std 650 special tank primary drains

The refrigerated tank primary components shall also include those parts of a single-wall or an inner tank that are not in contact with the refrigerated liquid but are subject to the refrigerated temperature. Such API Std 650 special tank components include roof plates, roof manways and nozzles with their reinforcements, roof-supporting structural members, and shell stiffeners when the combined tensile and primary bending stresses in these components under design conditions are greater than 6000 lbf/in.2.

For API 650 tanks Projection from outside of tank shell to extreme face of flange - plus or minus 5 mm. API Std 650 special tank Elevation or radial location - plus or minus 6 mm. API 650 tanks Flange tilt in any plane, measured on the diameter across the gasket surface - plus or minus degree but not exceeding 5 mm. Flange bolt hole orientation - plus or minus 2 mm.

FANALCA (which is most big Motorcycle factory in Columbia ) ,And FANALCA is Japan Honda's only distributor in Colombia, they have visit our company in 2017 ,and they have purchase our SAPH370,SAPH440 coil 80-100 tons every month. They are very satisfied with our company's product Gallery, and give a high evaluation and affirmation to our company's professionalism and after-sales service system.

}

The normal operation of API Std 650 special tank includes receiving oil, storing oil, sending oil and measuring oil. The correct use and operation of oil storage tank is directly related to the production safety and oil loss of oil tank. In order to use and operate the API Std 650 special tank correctly, it is necessary to be familiar with and master the structure and performance of the API Std 650 special tank and its accessories, such as the maximum storage capacity of the oil tank, the pressure range that can bear and the safety fabrication specification.

After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!