API Std 650 floating-roof tanks lining

The thickness of the API Std 650 floating-roof tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 0.57 in. The nozzle neck is seamless steel pipe and conforms to ASTM A53, Grade A; the materials in the tank wall and reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank walls are fully radiographed, double-welded butt joints. The adequacy of the reinforcement and attachment welds shown in Figure F-7 shall be determined.
To determine the length of the nozzle neck within the limits of reinforcement, the smaller of the following calculated values shall be used:(2.5)(0.625) = 1.56 in.
(2.5)(0.375) + 0.75 = 1.69 in.

If additional requirements are met, higher internal pressures are allowed. API 650 only covers tanks that support the whole bottom evenly and API Std 650 floating-roof tanks tanks in non-refrigerated service that have a maximum design temperature of 200 degrees F. It requires that you have a minimum material thickness of 3/16 inch.

Tunisia cutomer purchased around 1500 tons 304L,310S stainless steel plate from us and make tanks in August, 2017. The company was skilled in the design and manufacture of stainless steel tanks, API Std 650 floating-roof tanks processing systems and equipment for the food, dairy, beverage, chemical, pharmaceutical, biotechnology, and pure water industries. They also sent the inspection team come our company and visited our production line. After using our stainless steel plate, the customer was very satisfied with our products.

API Std 650 floating-roof tanks belongs to metal oil tank. Metal oil tank is a kind of vessel made by welding steel plate. The common shapes of metal tank are vertical metal tank, horizontal metal tank and spherical metal tank. The advantages of API Std 650 floating-roof tanks etc. metal oil tank are good sealing, not easy to leak, can be installed with heating and insulation function, metal tank can withstand high internal pressure, large vertical metal tank such as API Std 650 floating-roof tanks also has the characteristics of small floor space and large storage capacity.

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.