API Std 650 aluminum tanks shell nozzles
In this project, an elemental area of API 620 oil storage tank wall is constructed of ASTM A516 Grade 55 steel plate subjected to a meridional unit force, T1, of 2620 lbf/in. tension and a latitudinal unit force, T2, of 2880 lbf/in. compression. The meridional radius of curvature, R1, is 132 in., and the length of the normal from the surface to the axis of revolution, R2, is 409 in. The joints in the wall are spot-radiographed, double-welded butt joints, and no corrosion allowance is required.The problem in this example is to graphically find the minimum thickness of tank wall required for the given conditions (see API 620 tank standard 5.10.3.3).Solution: As determined from Table 5-1, the maximum, allowable tensile stress value, Sts, for ASTM A516 Grade 55 steel plate in simple tension is 16,500 lbf/in.2. Since the compressive stress is latitudinal, the governing value of R for this situation is R1, or 132 in.
API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API Std 650 aluminum tanks. It can be any tank size.
The Indian customer purchased our A516 Gr 70 pressure vessel steel plates to make tanks. They have very strict requirement for raw materials quality. For the A516 Gr 70 pressure vessel steel plates, they asked for Normalizing, 0℃ impact, A578 UT test, PWHT and so on tests, our Q/C department witness the production process with the technician from the customer company together. Meanwhile, we arrange BV inspection to check the quantity, spray mark, stamp on the A516 Gr 70 pressure vessel steel plates, and so on.
}During the use of API Std 650 aluminum tanks, the tank material is prone to crack and leakage under the action of pressure, corrosion, wear and other conditions. Especially in the oil producing area, the temperature difference in four seasons is large and the natural environment is bad, which will accelerate the consumption of oil storage tank and cause many potential safety hazards. Therefore, the API Std 650 aluminum tanks must undergo strict inspections before being put into use after the production and installation are completed, so as to avoid cracks and leakage in short-term use and affect production safety.
After-sales service is an important part of measuring a product good or not. After sales service can't be ignored. Good service can really make consumers feel relieved. We have always done a good job in after-sales service, so as to bring consumers a better reference when purchasing and a better experience during use of our steel materials. We will call back and follow up the performance of our steel products regularly.