API standard 650 uplifting tanks calculated failure pressure

Our quality control department will do inspection for details of the steel materials API standard 650 uplifting tanks before delivery We would invite the customer side to attend the inspection together If they can not come, we will also take rich pictures for them to check Meanwhile, we will publish inspection report and send them the PDF version Besides, we accept any third party inspection such as SGS, BV, etc And our quality control department will support the third party to inspect the steel materials smoothly and try our best to deliver the qualified steel materials to customers earlier,API standard 650 uplifting tanks. Visual InspectionUpon completion of all the foregoing tests, the pressure in the tank shall be released and a thorough visual inspection shall be made of both the inside and outside of the tank, giving particular attention to all internal ties, braces, trusses, and their attachments to the walls of the tank. Anchors shall be checked for snug tightness and adjusted if required. Anchor threads shall be fouled by peening or tack welding to prevent loosening. In lieu of thread fouling, double nuts may be used.Rate of Water Filling and Water TemperatureThe rate at which water is introduced into a tank for a hydrostatic test shall not exceed 3 ft of depth per hour. The foundation, venting equipment, or other conditions may limit the water filling to a lower rate. Pressure shall not be applied above the surface of the water before the tank and its contents are at about the same temperature.This standard applies only to API 650 tank API standard 650 uplifting tanks whose entire bottom is uniformly supported and to API 650 tank in non-refrigerated service that have a maximum design temperature of 93°C (200 °F) or less.On November 1st, our company organized some of company staff to visit Zhengzhou Children Welfare Institute, and gave children cookies and toys, as well as concerns to the Children. With the development of the society, disabled children gets increasing concerns and help from all walks of life. Fortunately, Chinese Government gives high concern to the handicapped children and has built Children Welfare Institutes all over the country to guarantee their lives.Anti corrosion of API standard 650 uplifting tanks:
After using for a certain period of time, it is necessary to check the corrosion protection of the API standard 650 uplifting tanks. If necessary, the outer wall of the metal oil tank should be painted with new anti-corrosion paint to ensure that the outer wall of the API standard 650 uplifting tanks does not fall off and has good waterproof and rust resistance.
API standard 650 uplifting tanks cleaning:
The long-term use of API standard 650 uplifting tanks will produce impurities on the tank wall and deposit on the tank bottom, resulting in tank corrosion to leakage. According to the safety standard of oil tank, the API standard 650 uplifting tanks shall be cleaned and derusted regularly to ensure the quality of oil stored and the safety of oil tank equipment.