API standard 650 stainless and carbon steel tank centerline-stacked

Standard API 650 tank calls for calculations based on the specific gravity of the liquid product being stored. This permits the thickness of the steel API standard 650 stainless and carbon steel tank needed as well as other specifications of how the tank is built to be determined by the weight of the API 650 tank.

X-ray inspection is mainly applicable to the internal inspection of pressure bearing parts and materials of metal oil tanks such as API standard 650 stainless and carbon steel tank. It can clearly find the blocky defects inside the welded joints. However, the cost and resource consumption of radiographic testing are large. Magnetic particle testing can effectively detect the surface and near surface defects of API standard 650 stainless and carbon steel tank etc. metal oil tanks, but magnetic particle testing can not effectively identify the internal defects of oil tanks.

In cylindrical tank walls, the longitudinal weld joints in adjacent shell courses, including compression ring welds, shall be offset from each other a minimum distance of 12 in. The butt-weld around the periphery of a thickened insert plate, or the fillet weld around the periphery of a reinforcing plate, shall be at least the greater of 10 times the shell thickness or 12 in. from any butt-welded seam or the bottom-to-shell or roof-to-shell joint. As an alternative, the insert plate (or the API standard 650 stainless and carbon steel tank reinforcing plate in an assembly that does not require stress relief) may extend to and intersect a flat-bottom-to-shell corner joint at approximately 90 degrees.

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;

The company attaches great importance to logistics services, sets up our own transport truck fleet, improves customer response capacity through the improvement of logistics capacity, and further reduces costs. Customers ordering API standard 650 stainless and carbon steel tank steel from our company can not only enjoy the service of fast delivery, but also enjoy lower transportation costs. Fast, accurate, simple and efficient has always been our principle.