API standard 650 partially anchored liquid-storage tanks shell compression

API standard 650 partially anchored liquid-storage tanks Breathing valve: The function of the oil tank breathing valve is to adjust the oil and gas pressure in the tank. When the pressure in the tank is too high, part of the excess oil and gas will be discharged through the breathing valve to reduce the pressure in the tank; when the pressure in the tank is too low, through breathing The valve sucks in air from the outside of the tank to increase the pressure in the tank and keep it constant with the atmospheric pressure. The breathing valve is usually installed at the top of the oil tank.

Production Weld Tests
Production weld test plates shall be welded for API standard 650 partially anchored liquid-storage tanks primary-component butt-welded shell plates when welding procedure qualifications are required to be impact tested per Q.6.2 and Q.6.3. The number of production weld tests shall be based on the requirements of Q.6.6.3 and Q.6.6.4. The locations impact tested (i.e., HAZ and/or weld deposits) shall likewise be the same as required for weld procedure qualifications per Q.6.2 and Q.6.3. Weld testing shall be in accordance with Q.6.6.5. Test plates shall be made from plates produced only from the heats that are used to produce the shell plates for the large welded steel tank.

For API 650 tanks Projection from outside of tank shell to extreme face of flange - plus or minus 5 mm. API standard 650 partially anchored liquid-storage tanks Elevation or radial location - plus or minus 6 mm. API 650 tanks Flange tilt in any plane, measured on the diameter across the gasket surface - plus or minus degree but not exceeding 5 mm. Flange bolt hole orientation - plus or minus 2 mm.

Based on the principle of “sincerity and win-win cooperation”, our company keeps forging ahead. In the fierce market competition, we have won the trust and rapid development of our customers with good cooperation and sincere service spirit. With pioneering spirit, the pursuit of excellence, continuous learning, and never satisfied content, we will create a win-win situation with our customers to create a better future. The company has sufficient inventory and complete varieties and specifications.

We have our own factory, including the production and manufacturing of steel pipes, with a special API standard 650 partially anchored liquid-storage tanks steel pipe manufacturer and storage warehouse. Welcome to visit our factory, we will provide customers with high quality products that meet the requirements. And has the perfect API standard 650 partially anchored liquid-storage tanks after-sale service guarantee system, lets the customer save the worry and the labor.