API standard 650 open-top tanks problem solution
Standard Hydrostatic and Pneumatic TestsAfter erection is completed and stress relieving, radiographic examinations, or other similar operations, as may be required, are performed, each tank shall satisfactorily pass a series of hydrostatic and pneumatic tests as prescribed in 7.18.2 through 7.18.6. Whenever a solution film is specified in this section to be applied to welding, linseed oil or another equivalent material for disclosing air leakage may be substituted. In freezing weather, linseed oil or a similarly suitable material shall be used.The attachment welding around all openings and their reinforcements in the walls of the API 620 tank shall be examined by the magnetic-particle method both inside and outside the tank API standard 650 open-top tanks. When the underside of a tank bottom rests directly on the tank grade (and is not accessible after erection), such examination of welding on the underside of the bottom and subsequent air testing may be omitted.
The vent pipe mouth should be 4m or more above the ground. The nominal diameter of the API standard 650 open-top tanks API 650 petroleum storage tank vent pipe should be no less than 50mm and a flame arrestor should be installed.
We have built solid cooperation with Myanmar Navy since 2015, starting from a try order about 412 tons LR AH36 shipbuilding steel plates. Myanmar navy builds frigate every year and book shipbuilding steel materials from us regularly. This time, the Myanmar navy’s local representative visit us and put another order about 2025 tons LR grade A steel plates. According to clients requirements, we arranged API standard 650 open-top tanks SGS inspection for the LR grade A steel plates before shipping and send them inspection report.
}The lip seal of floating roof storage tank, API standard 650 open-top tanks relies on the sliding contact between elastic lip and tank wall. This kind of seal has strong applicability, but the requirements of manufacturing technology and material selection are high, and the determination of elastic seal also exists. The secondary seal of floating roof storage tank, API standard 650 open-top tanks is to add a seal on the basis of primary seal. It is proved by experiments that the secondary seal can reduce the liquid consumption by more than 50%, and has a more significant effect in safety.
The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.