API standard 650 open-top tanks drains
When the API standard 650 open-top tanks top shell course is the minimum thickness indicated in 5.10.4, Table 5-6 and Figure 5-6, details a – e, h and i, the minimum anchorage shall be designed for normal loads as specified by the Purchaser and by this standard. See 5.11.2.3 for the allowable stress. When the top shell course is thickened beyond the minimum thickness provided in Table 5-6 or as in Figure 5-6, details f and g, or a knuckle is used, the minimum anchorage shall be designed for three times the internal design pressure. The allowable stress for this loading is 90% of the minimum specified yield strength of anchorage material.API 650 storage tank is used for commonly used oil, gasoline, diesel, chemical and production water storage. API standard 650 open-top tanks Storage tanks built to these standards are spread across U.S. refineries, terminals, pipelines, and production facilities. The API 650 detailed standard specifies the design, processing, welding, inspection and installation procedures for storage tanks.The Seamless Pipe Q345D to Thailand. In November of 2015, Thailand OTTO group contacted with us from Internet. They are finding the trustable supplier of S355/2H seamless pipe for the cable car supporter. Due to the special using of the pipes, they are very careful and serious when choosing the supplier. After one months contact and discussion by email, they come to our company. We drive to the pipe mill for visit of 2 days. Through this visit, they are very confident with our production ability and products quality. Finally, they accept the grade we suggest Q345D. After back to office, they put the order of 1800 tons pipe to us directly.Volatilization is the characteristic of oil. Under normal temperature and pressure, as long as the oil is in contact with air, the surface will volatilize. Through scientific analysis and summary, the causes of oil volatilization loss in API standard 650 open-top tanks are: natural ventilation loss, static storage loss, dynamic liquid level loss. In the use of API standard 650 open-top tanks, static storage loss and dynamic liquid level loss are common losses.We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.
Latest NewsMore+