API standard 650 mechanically-anchored steel tanks self-anchored

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.When the API standard 650 mechanically-anchored steel tanks top shell course is the minimum thickness indicated in 5.10.4, Table 5-6 and Figure 5-6, details a – e, h and i, the minimum anchorage shall be designed for normal loads as specified by the Purchaser and by this standard. See 5.11.2.3 for the allowable stress. When the top shell course is thickened beyond the minimum thickness provided in Table 5-6 or as in Figure 5-6, details f and g, or a knuckle is used, the minimum anchorage shall be designed for three times the internal design pressure. The allowable stress for this loading is 90% of the minimum specified yield strength of anchorage material.API 650 petroleum storage tank body design is mainly the design of tank bottom, API standard 650 mechanically-anchored steel tanks tank top and tank wall, and the design of tank wall is particularly important. As the main pressure bearing part of API 650 petroleum storage tank, the tank wall bears loads including liquid pressure, wind pressure, seismic load, opening stress, etc. The calculation of such loads is explained in detail in various API standard 650 mechanically-anchored steel tanks storage tank design standards. But in addition, the API 650 petroleum storage tank wall also bears the push-pull force and torque of the connected pipeline.Company through its own API standard 650 mechanically-anchored steel tanks website, multimedia, radio, newspapers, the group, the handbook of the corporate culture carrier, approved and publicity column, in-depth to carry out enterprise culture construction, also through photography, painting, calligraphy, cartoon, speech, and the songs of the enterprise design, various cultural and sports activities to carry out enterprise culture construction,API standard 650 mechanically-anchored steel tanks. Breathing valve: The function of the oil tank breathing valve is to adjust the oil and gas pressure in the tank. When the pressure in the tank is too high, part of the excess oil and gas will be discharged through the breathing valve to reduce the pressure in the tank; when the pressure in the tank is too low, through breathing The valve sucks in air from the outside of the tank to increase the pressure in the tank and keep it constant with the atmospheric pressure. The breathing valve is usually installed at the top of the oil tank.