API standard 650 mechanically-anchored flat-bottom tanks lap joint
API 650 internal floating roof oil tank is a volatile liquid storage tank with a combination of a dome tank and an internal floating roof structure, which is a floating roof assembled under the dome of the API standard 650 mechanically-anchored flat-bottom tanks storage tank. The combination of the vault roof outside the API 650 storage tank and the floating roof inside the tank has been widely used in gasoline, aviation kerosene and more volatile chemical liquids.
A refrigerated tank may be a single-wall insulated tank or a double-wall tank that consists of an inner tank for storing the refrigerated liquid and an outer tank that encloses an insulation space (which usually has a lower gas pressure) around the inner tank. A double-wall tank is a composite tank, and the outer tank is not required to contain the product of the inner tank. In a double-wall tank, differences in API Standard 620 tank materials, design, and testing exist between the inner and outer tanks.
Welding inspection of bottom plate of API standard 650 mechanically-anchored flat-bottom tanks, vertical oil tank: During the fabrication and installation of API standard 650 mechanically-anchored flat-bottom tanks, the bottom edge plate is welded first. According to the requirements of the technical standard, penetrant inspection is required for the weld of edge plate at the bottom of API standard 650 mechanically-anchored flat-bottom tanks, that is, penetrant testing is required for each weld bead priming, filling and capping. In the process of testing, if any defect is found, it shall be repaired immediately. After the repair, the surface coloring penetrant test shall be conducted again until the test result is qualified.
We provide customers with demand support and better serve them. We are committed to actively meet the needs of customers, always keep in touch with them in a timely manner, leave a good impression for customers, and make customers satisfied through our unremitting efforts. Customer satisfaction is our most basic vision, striving to become the best steel product service provider in the world
In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the API standard 650 mechanically-anchored flat-bottom tanks steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.
Responsibilities: dealing with quality feedback and complaints from Customer.Bebon has the after sale service department, which is responsible to solve the problem of technical support and quality, service complaints. You can also contact the company customers service online if you have any problem when you receive the products. The responsibility is to deal with quality feedback and complaints from Customer. Welcome to come and visit our company office.
