API standard 650 larger diameter tanks welding terms
Under the action of the earthquake, API 650 storage tank is mainly damaged by the phenomenon of the lower part of the API standard 650 larger diameter tanks tank wall. Therefore, the key point of seismic calculation is to prevent the tank wall from buckling under axial pressure.
The foundation design of the API standard 650 larger diameter tanks should meet the requirements of foundation stability and deformation, that is, the API standard 650 larger diameter tanks foundation should not be crushed and the uneven settlement value of the foundation should be within the allowable range. The uneven settlement of the storage tank foundation should be specified in the design process of the safe allowable range, because excessive uneven settlement will reduce the safety of the API standard 650 larger diameter tanks and cause distortion and deformation of the tank wall and bottom plate.
API 620 Crude Oil Tank Non-pressure PartsWelds for pads, lifting lugs, and other nonpressure parts, as well as temporary lugs for alignment and scaffolding attached to primary components, shall be made in full compliance with a welding procedure qualified in accordance with Q.6.1. Lugs attached for erection purposes shall be removed, and any significant projections of API standard 650 larger diameter tanks weld metal shall be ground to a smooth contour. Plate that is gouged or torn in removing the lugs shall be repaired using a qualified procedure and then ground to a smooth contour. Where such repairs are made in primary components, the area shall be inspected by the liquid-penetrant method. A visual inspection is adequate for repairs in secondary components.
The business department is mainly responsible for communicating with customers, from the manufacturing of steel plates, steel pipes and other products, knowing customers' needs and processing conditions, etc. within the time agreed with customers, the delivery time is short, the price is the most competitive, and the service is the best. Their responsibilities are to deal with customer consultation, solve customer problems, update production plans, and instruct the logistics department to deliver products to customers.
Iron and steel goods, including pig iron, ingots, all kinds of steel and so on. Therefore, logistics companies are required to load evenly and evenly in the process of transportation, prevent moisture and prevent corrosion. It is necessary to prevent the API standard 650 larger diameter tanks steel sheet from being mixed with water when transporting the steel; it is necessary to prevent the API standard 650 larger diameter tanks steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when transporting the steel; it is necessary to prevent the steel from being mixed with water when loading the API standard 650 larger diameter tanks steel sheet on the truck Good luck.