API standard 650 fixed roof tanks impulsive natural period

The company has an entrepreneurial team composed of highly educated and high-quality talents, whose leaders graduated from famous universities. As the first group of teams engaged in e-commerce industry in China, it witnessed the rapid development of e-commerce, accumulated rich steel professional knowledge and formed a scientific management system.The thickness of the API standard 650 Fixed roof tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 0.57 in. The nozzle neck is seamless steel pipe and conforms to ASTM A53, Grade A; the materials in the tank wall and reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank walls are fully radiographed, double-welded butt joints. The adequacy of the reinforcement and attachment welds shown in Figure F-7 shall be determined.
To determine the length of the nozzle neck within the limits of reinforcement, the smaller of the following calculated values shall be used:(2.5)(0.625) = 1.56 in.
(2.5)(0.375) + 0.75 = 1.69 in.API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API standard 650 fixed roof tanks. It can be any tank size.Our vasion is to create a first-class steel plate manufacturing enterprise with international competitiveness. Business Vision: Improve value with quality and become the leader in the industry. Core values: people-oriented, integrity, responsibility, excellence. Development strategy: Seek development through science and technology, and seek benefits from management. Besides, we will create a harmonious business atmosphere, unblock the channels for employees to communicate, and build a stage for various sports and talents.Weld inspection of API standard 650 fixed roof tanks, vertical oil tank wall plate: In the welding inspection process of oil tank wall plate, attention should be paid to the defects of thick wall plate, such as incomplete penetration, incomplete root fusion and cracks. If there is a root incomplete penetration defect, it is necessary to open the weld joint with carbon arc air gouging and grinding machine grinding, or even weld through, and then weld again after the defect is removed.