API standard 650 anchored liquid-storage tanks roofs

The vent pipe mouth should be 4m or more above the ground. The nominal diameter of the API standard 650 anchored liquid-storage tanks API 650 petroleum storage tank vent pipe should be no less than 50mm and a flame arrestor should be installed.

Thickness as it Affects Preheat and Post-heat Requirements
Plate with thicknesses below 1/2 in. is reasonably notch tough. In most steels, when the API standard 650 anchored liquid-storage tanks used plate thickness exceeds 3/4 in. – 1 in., notch toughness, particularly as welded, decreases sharply. The decrease in notch toughness can be minimized by the conventional post-heat treatment and, in many steels, by preheat treatment. The benefits of preheat treatment in steels 3/4 in. – 1 in. thick have been demonstrated; similar benefits could be expected in thicker steels, but sufficient experimental data are currently lacking.

Prefabrication requirements for API standard 650 anchored liquid-storage tanks, large vertical storage tanks:
1. The machined surface of the edge of the steel plate should be smooth, and there should be no defects such as slag inclusion, delamination, cracks, etc., and the surface hardened layer produced by the flame cutting groove should be removed.
2. Dimension deviation after steel plate processing: the deviation of plate width is less than 1.5 mm, the deviation of plate length is less than 2 mm, and the difference between diagonals is less than 3 mm.

In 2019, through the concerted cooperation of the enterprise team, the sales volume has grown steadily, and the annual sales volume has exceeded 300 million yuan. For this reason, both the investors and employees of the enterprise have received satisfactory returns. With strong development potential and brand advantages, we have always been committed to "integrity, efficiency, pragmatism, dedication" corporate spirit, dedication to society, and return to the public. From this perspective, the enterprise will have a bright future. In a good environment with strong hardware facilities and excellent management personnel, we can make sure that the company will develop stronger and bigger.

In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the API standard 650 anchored liquid-storage tanks steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.

Before delivering our hot rolled plate product we apply various tests to check the quality of carbon steel API standard 650 anchored liquid-storage tanks plates such as- mechanical test, chemical test, hardness test, toughness test, eddy current test, impact test, micro test, flaring test, flattening test, etc. We are provided best packing for structural steel plates to avoid rust. Our after-sales service team will contact you if you have any question.