API standard 650 anchored liquid-storage tanks loads

API 650 petroleum storage tank body design is mainly the design of tank bottom, API standard 650 anchored liquid-storage tanks tank top and tank wall, and the design of tank wall is particularly important. As the main pressure bearing part of API 650 petroleum storage tank, the tank wall bears loads including liquid pressure, wind pressure, seismic load, opening stress, etc. The calculation of such loads is explained in detail in various API standard 650 anchored liquid-storage tanks storage tank design standards. But in addition, the API 650 petroleum storage tank wall also bears the push-pull force and torque of the connected pipeline.

API 620 Tank Standard Post-heat Treatment (Stress Relief)
The post-heat treatment now performed on pressure vessels is of established value, although the mechanism by which the improvement is realized may be open to debate. Post-heat treatment of API standard 650 anchored liquid-storage tanks tank sections when the plate thickness exceeds 11/4 in. is required as stated in 5.25. In special cases, the possibilities of post-heat treatment after erection should be explored. Post-heating an insulated tank may be possible if an ample source of heat is readily available and if the rigidity of the tank is adequate.
The thermal stress-relief treatment performed on pressure vessels is recognized as a means for reducing the probability of brittle failures.

The cone slope of the completed API standard 650 anchored liquid-storage tanks foundation is 15/1000 for the general foundation and less than 35/1000 for the soft foundation. After the foundation settlement of the storage tank is basically stable, the surface slope must be greater than eight thousandths. The edge of the tank bottom should be more than 0.3 meters higher than the surrounding ground. Above the ground, the tank bottom leakage detection tube should be drawn from the foundation sand cushion and cross the foundation ring wall or the slope protection surface. The circumferential distance should be less than 20 meters, and each API standard 650 anchored liquid-storage tanks should have at least 4 detection tubes.

Our company has a comfortable office environment, covers a large area, can accommodate hundreds of people working at the same time. All kinds of green plants are placed in the company, with a healthy office environment. Our company also has gym, table tennis, leisure bar, kitchen, refrigerator, microwave oven and other equipment. Humanized construction provides comfortable office environment for employees.

Our company is located in the Central Plains, Zhengzhou City, convenient transportation. There is the largest Xinzheng airport, welcome customers from all over the world to visit our company. Our factories are all located near the port. The logistics is very convenient, which can save the delivery time.

After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.