API standard 650 aluminum storage tanks convective water parameters

Our company has sales department, technology department, quality inspection department, after-sales department, logistics department. Each department has professional knowledge and high professional quality, put customers first, think about the interests of customers, actively communicate with customers and solve problems smoothly.

Sand blasting and derusting of API standard 650 aluminum storage tanks uses compressed air as power and SiC, pomegranate sand and quartz sand as spraying materials to form high-speed jet beam, which is used to remove rust and dirt on the surface of metal storage tank and improve the binding force of workpiece with coating and plating material. Sand blasting is often used in API standard 650 aluminum storage tanks construction.

The API standard 650 aluminum storage tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.