API standard 650 aboveground petroleum storage tanks bottom joints
Data Required from Manufacturer on Completed TanksIf specified in the purchase order, the Manufacturer shall supply marked copies of plans (or a separate sketch) showing the location of all plates, with a means of identifying each plate with the heat numbers. These markings shall be checked by the inspector. A copy shall be attached to the Manufacturer’s report.Check of Stress-relieving OperationThe API standard 650 aboveground petroleum storage tanks inspector shall check any thermal stress-relieving operation and shall be satisfied that the temperature readings are accurate and that the procedure conforms to the applicable requirements of these rules.The API 650 petroleum storage tank standard is one of the most widely used design specifications. It is the API 650 standard of the American Petroleum Institute. The main goal of the API 650 standard is to promote the purchase and construction of vertical, above-ground, and welded manufacturing API standard 650 aboveground petroleum storage tanks tanks through the requirements contained in its parts to ensure that the required safety regulations are met.BBN had provided API standard 650 aboveground petroleum storage tanks Hardox plates for more than 15 years for widely applied in coal mining machinery, cement equipment, road construction machinery, engineering machinery, dump trucks, metallurgical area and port fields. In 2016,we brought our customer to visit our API standard 650 aboveground petroleum storage tanks NM400 steel plate producing line and our Shanghai warehouse for 30000 tons plate and structure. As a result, Our client purchased 500 tons NM 400 as first order, which is shipped by 3 times. In future, BBN will always guarantee that all the delivery condition for Hardox plate provided will be with quenching and tempering, which is the best delivery type according GBT 24186 standard.The mechanical seal of floating roof API standard 650 aboveground petroleum storage tanks relies on mechanical force to press the sealing steel plate tightly against the tank wall, so that it can slide on the tank wall and avoid gap as far as possible. However, mechanical seal has high requirements for the geometry of storage tank and poor adaptability, so mechanical seal is rarely used in newly built floating roof API standard 650 aboveground petroleum storage tanks.We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide API standard 650 aboveground petroleum storage tanks reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.
Latest NewsMore+