API 650 welded steel oil storage tanks CSA specifications plates

Impact Tests for High Alloys
Impact tests are not required for oil steel storage material nickel alloy welds made with electrodes/filler metals covered by AWS Specification A5.11 or AWS Specification A5.14, provided the nominal nickel content is 50% or greater, and the weld is deposited by the shielded metal-arc welding (SMAW), gas metal-arc welding (GMAW), gas tungsten-arc welding (GTAW), or plasma-arc welding (PAW) processes. When A5.11/A5.14 specifies the nickel content as a “remainder,” the nickel content shall be determined by summing the maximum specified values of the other elements (use the average specified value for elements with specified ranges) and subtracting from 100%.

For API 650 tanks Projection from outside of tank shell to extreme face of flange - plus or minus 5 mm. API 650 welded steel oil storage tanks Elevation or radial location - plus or minus 6 mm. API 650 tanks Flange tilt in any plane, measured on the diameter across the gasket surface - plus or minus degree but not exceeding 5 mm. Flange bolt hole orientation - plus or minus 2 mm.

Myanmar 4800 tons ABS AH36 and ABS A shipbuilding plates. This is very good customer of us, and we have cooperated many times for shipbuilding plates API 650 welded steel oil storage tanks . The most frequently ordered is shipbuilding plates, almost hundreds tons every 2 month, which are finally supplied to Myanmar’s navy. Just in last year, we have supplier more than 4800 tons shipbuilding plates for the customer continuously.

Oil storage tank with floating roof structure: The floating roof in the API 650 welded steel oil storage tanks oil storage tank can effectively reduce the volatilization consumption of oil, because the gas space on the oil liquid surface in the floating roof storage tank is small, the exhaust volume is low, and the breathing loss is very small. That can reduce the volatilization loss caused by the "big breath" of the API 650 welded steel oil storage tanks. Strengthen the inspection and maintenance of API 650 welded steel oil storage tanks: regularly check the sealing conditions of oil storage tanks, and check and maintain important auxiliary equipment to ensure good sealing performance.

After-sales service team is a key department to test the steel quality. Product quality is always the foundation of our survival and development. The company's full inspection from raw materials to finished products; and implements standardized, scientific, and strict internal quality control and management systems in accordance with the process flow during the production process; products can only leave the factory if qualified, and follow-up problem solving systems are implemented in after-sales services to guarantee the customers’ interest.