API 650 uplifting tanks sheel openings
Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;
Inspection of weld and micro crack of API 650 uplifting tanks: the inner and outer surface of API 650 uplifting tanks, weld and heat affected zone shall be observed by naked eyes first. 100% ultrasonic testing or 100% penetrant testing are carried out for butt welds of API 650 uplifting tanks. For the defects found by 100% magnetic particle inspection, dye detection, 100% ultrasonic inspection or 100% penetrant inspection, the radiographic inspection shall be used again to ensure the accuracy of the test results.
The ring of API 650 uplifting tanks annular plates shall have a circular outside circumference, but may have a regular polygonal shape inside the tank shell with the number of sides equal to the number of annular plates. These pieces shall be butt-welded in accordance with API Standard 620 R.7.1.1, Item b. The plates of the first shell course shall be attached to the annular bottom plates by welds as required by API Standard 620 5.9.5 except when a full penetration weld is used or required.